Configure Block Writes

This screen will allow the user to configure up to five (5) block writes for the instruments.

 

The Instrument field is the instrument to use the write for.  The range is 0 – 32.  The Update Interval field is the update time, in seconds, to perform the write.  The range is 0 – 300 seconds.  The Source Register field is the 9220 register where the values will come from.  The range is 0 – 32767.  The Count field is the number of successive registers to read.  The range is 0 – 80.  The Target Register field is the 9220 register to put the count into.  The range is 0 – 32767.